Want to upgrade to multiple satellites?

Want to receive more then 2 satellites on a standard dish?Have a look at our innovative MultiConnect system and learn what it can do for you...

Unicable II
New

Unicable II Cascadable switch with Terrestrial input and 4x Sky dSCR/SatCR/Legacy+Terrestrial outputs

ISKY-UST110-CUO4O-16P

Item: 5412

ISKY-UST110-CUO4O-16P

The Multiswitch unit connects to a Quattro LNB and offers a Terrestrial input port to connect a terrestrial antenna for reception of UHF/DAB/radio broadcasts. The terrestrial signal can be amplified through a dedicated ON/OFF switch and is combined over each of the 4 output ports.

 

The Multiswitch unit can be powered through a DC input port, any of the trunk output lines or from the STB output ports (typically using a Sky power inserter device). In typical cascaded MDU installations, the DC voltage supplied over the DC in or trunk output lines is passed through to the trunk input lines in order to power the LNB and the ‘STB DC pass to LNB trunk’ switch must be set to OFF.

 

To help the installer ensure at the time of installation that the unit’s power supply is sufficient to support a full load in the future i.e. 4x SkyQ STBs, the Multiswitch features a special power diagnosis test mode that is triggered automatically upon unit startup. During this 15 second test, the Multiswitch will operate in full load and will light the power-diagnosis led in green if the unit is supplied with sufficient power or in amber if not.

A status led, located next to each output port, indicates the operating mode of the port (Legacy=solid green, Sky dSCR=blinking green, Power diagnosis=blinking red/green).

 

Optional accessories (sold separately):

■ MDU power supply unit, supplying up to 4 units + LNB (19V, 3.5A) - Item 5417 IDLU-ADPT01-19V3AO-OPP

 

■ Power Inserter including a single unit power supply (19V, 0.94A) - Item 5380 IDLU-PINS02-OOOOO-OPP For Indoor and outdoor (IP54) installations.  

 

For Indoor and outdoor (IP54) installations.  

Product Specifications
draw
Inputs 4 x Satellite IF inputs from Quattro LNB
  1 x DTT/DAB/FM input from Terrestrial antenna
   
Outputs  4 x loopthrough satellite IF outputs *
  1 x loopthrough terrestrial output
  4 x Sky dSCR (16UBs) / SatCR  / Legacy auto-detect ports with combined Terrestrial signal
   
Control Protocol  Sky dSCR (Sky Q), SatCR (Sky+), Legacy 13/18V + 0/22kHz,         DiSEqC1.x/DiSEqC2.0
   
Inputs frequency range: Satellite 950 ~ 2150 MHz
        Terrestrial 40 ~ 840 MHz
   
Loop-through loss/gain: Satellite 4dB max. (loss)
        Terrestrial 5dB max. (loss) [Amplification=OFF]
  +12dB min. (gain) [Amplification=ON]
   
Conversion gain: Satellite (Trunk to Tap, outside of AGC) 25dB min
             Terrestrial (Terrestrial in to Tap) -20dB [Amplification = OFF]
  -5 ~ +5dB [Amplification = ON]
   
Output signal level (AGC controlled) -25dBm (83dBuV)
Input power range -50 to -5 dBm
User band (Channel) bandwidth 46MHz
User band (Channel) gain ripple 3 dB max.
   
User band frequencies (Channels) CH3:   1680MHz        
  CH9:   1280MHz
  CH11: 1380MHz
  CH14: 1480MHz
  CH15: 980MHz
  CH16: 1030MHz
  CH17: 1080MHz
  CH18: 1130MHz
  CH19: 1530MHz
  CH20: 1580MHz
  CH21: 1630MHz
  CH22: 1730MHz
  CH23: 1780MHz
  CH24: 1830MHz
  CH25: 1880MHz
  CH26: 1930MHz
RF Isolation:  
          Satellite/Satellite IF 25 dB min.
          Satellite/Terretsrial 25 dB min.
          Satellite Channel/Channel (UBs) 28 dB min.
   
Integrated phase noise 1.5 degrees max.
Input / Output VSWR 2.5 : 1
Input / Output Impedance 75 Ω (F-Type)
Legacy port switching   V/L=>13V/0kHz , V/H=>13V/22kHz
  H/L=>18V/0kHz , H/H=>18V/22kHz
LNB power supply 500mA max. @18VDC
DC Power consumption 600~900mA @10~20VDC [max.]
Working Temperature - 20 ~ + 50 °C
Ingress protection IP54
Dimensions 151.86 x 110.24 x 26.00(H x W x D) mm
   
* Unused ports need to be terminated by 75 Ohm DC-blocked terminators
Frequently Asked Questions
There is no FAQ available for this product