Unicable

Unicable cascadable switch with 4 UBs, Ter. input & 1 Legacy port

IDLP-UST1O1-CUO1O-4PP

Item: 3708

IDLP-UST1O1-CUO1O-4PP

The IDLP-UST1O1-CUO1O-4PP is a small form factor Unicable multiswitch enabling installations with up to 4 satellite receivers over a single cable. In addition to its Unicable output, the multiswitch provides a useful universal legacy output so that a legacy satellite receiver can be connected as well.

 

Providing full flexibility and supporting various installation scenarios, the multiswitch may be powered by any of the connected Unicable receivers directly or through an external AC/DC Power Supply and a Power Inserter - see supported installations diagram below.

 

The multiswitch receives (and cascades) four satellite IF bands (L/V, L/H, H/V and H/H) and Terrestrial VHF/UHF signals. Both the Unicable and the legacy outputs are combined with the Terrestrial signal. The Terrestrial input is not amplified.

 

The communication protocol between the multiswitch and the receivers connected through the Unicable port is based on the EN 50494 standard for single cable distribution. For indoor and outdoor installations.  

Product Specifications
draw

 

Input Frequency Ranges:  
Satellite  950 ~ 2150 MHz
Terrestrial   47 ~ 862 MHz
   
Loop-Through Loss  
Satellite  - 3 dB Max.
Terrestrial  - 3 dB Max.
   
Conversion Gain:    
Unicable Output + 10  ~  + 20 dB
Legacy Universal Output -1  ~  + 7 dB
Output Signal Level (AGC controlled)  93 dBμV
Input Power Range - 45 ~  - 15 dBm
User Band (Channel) Bandwidth 40 MHz
User Band (Channel) Gain Ripple 3 dB Max.
User Band Frequencies (Channels) CH 0 :  1210.00 MHz
  CH 1 :  1420.00 MHz
  CH 2 :  1680.00 MHz
  CH 3 :  2040.00 MHz
   
RF Isolation:  
Satellite/Satellite IF 28 dB  Min.
Satellite Channel/Channel (User Bands) 30 dB Min.
LO Phase Noise @1 KHz: -92 Max. dBc/Hz
  @10 KHz: - 101 Max. dBc/Hz
  @100 KHz: - 99 Max. dBc/Hz
  @1 MHz: -103 Max. dBc/Hz
  @10 MHz: - 127 Max. dBc/Hz
   
Integrated Phase Noise 1.5 Degrees Max.
Input / Output VSWR 2.5 : 1
Input / Output Impedance 75 Ω 
Input / Output Connector F-Type
LNB Input V/L=>13 V /0 K , V /H=>13 V /22 K  (V)
  H/L=>18 V /0 K , H/H=>18 V /22 K  (H)
LNB Current Consumption 400 mA @ 13 ~ 18 V
DC Current Consumption 225 mA Max. @ 20 V (F-Type)
Operating Temperature - 20  ~  + 60 °C
Dimensions 120 x 88 x 35 (H x W x D) mm
Frequently Asked Questions
There is no FAQ available for this product