.png)
Professional MPEG-2 DVB integrated Receiver/Decoder with IP interface
IDLV-4000P
.jpg)
(570).jpg)
The IDLV-4000P is Inverto’s flagship of the professional IRD receiver series. This IRD is equipped with a variety of input (including DVB over ASI, IP, QPSK, QAM, COFDM and DS3) and output (CVBS, SDI, ASI, DS3 and IP) combinations. LAN control and monitoring are achieved by TCP/IP, SNMP and HDMS*. With its new level of features and flexibility, the IDLV-4000P becomes an ideal product for your digital headend system.
Main Features:
• Fully complies with MPEG-2, MP@ ML and DVB-S/-T/-C Standards
• IP Input or Output with UDP/RTP (optional)
• Multicast and Unicast on IP
• Supports PAL, NTSC and SECAM
• Supports various Conditional Access Systems (CAS)
• LAN Control based on TCP/IP, SNMP and HDMS*
• SDI Video Output with digital Audio embedded
• Two Sets of independent ASI Outputs
• Automatic PMT Update
• Compatible with Multiple De-encrypt CI Modules
• DS3 I/O for TS (optional)
• Switchable Audio Channel
• VBI-Teletext, EBU and DVB-Subtitle
• Upgradable through LAN Options
• DVB-S, DVB-T or DVB-C Tuner Input
• High Speed 100M Base-T IP Output
• High Speed 100M Base-T IP Input
• DS3I/OCard
(*Headend Devices Management System; Proprietary Software)
| QPSKM Demodulation & FEC Parameters | |
| Input Frequency Range | 950 ~ 2150 MHz |
| Input Level | - 25 ~ - 65 dBm |
| Input Impedance | 75Ω, F type |
| Symbol Rate | 2~ 45Mb/s (SCPC or MCPC) |
| Roll Off Factor | 0.20 or 0.35 |
| Punctured Rates | 1/2, 2/3, 3/4, 5/6, 6/7, 7/8 |
| Reeds Salomon Decoding | 204, 188, T = 8 and I=12 |
| DVB-C QAM Demodulation | |
| Connector | IEC, Female (7/8 MHz) or F Female (6 MHz) Input |
| Input Symbol Rate Range | 1 ~ 7 Mbps (PAL), 1 ~ 6 Mbps (NTSC) |
| Demodulation | 16/32/64/128/256 QAM |
| Tuner Bandwidth | 6 MHz or 7 MHz or 8 MHz (factory optional) |
| FEC Decoder | 1/2, 2/3, 3/4, 5/6, 7/8; K=7 |
| Frequency Range | 50 ~ 860 MHz |
| Digital Signal Input Level | -15 ~ 15 dBmV |
| Input Impedance | 75Ω, F type |
| DVB-T COFDM Demodulation | |
| Connector | IEC, Female (7/8 MHz) or F Female (6 MHz) Input |
| 1 IF Loop Through | Yes |
| Frequency Range | 470 ~ 862MHz; 174~230 MHz |
| Input Symbol Rate | 4.98 ~ 31.67Mbit/s (8MHz Bandwidth) |
| Constellation | QPSK, 16QAM, 64QAM |
| Tuner Bandwidth | 8 MHz |
| Digital Signal Input Level | -20 ~ - 75 dBmV |
| Input Impedance | 75 Ω, unbalanced |
| FFT Mode | 2 K/ 8 K |
| Guard Interval | 1/4, 1/8, 1/16, 1/32, off |
| FEC Code Rate | 1/2, 2/3, 3/4, 5/6 and 7/8 |
| DS3 Input | |
| Input Impedance | 75 Ω |
| Connector | BNC |
| Maximum Input Code Rate | 44.736 Mbit/s |
| Format | Unframed Framing according to G.804 / G.752 (DS3) |
| DS3 Loop Through Output | |
| Impedance | 75 Ω |
| Maximum Output Code Rate | 44.736 Mbit/s |
| Connector | BNC |
| Format | Unframed Framing according to G.804 / G.752 (DS3) |
| TS over IP Output | |
| Connetctor | 100base-T RJ45 |
| Output Bit Rate | 70 Mbits/s Max. |
| UDP/RTP | Multicast or Unicast |
| ASI Output | 2×Redundant Output |
| SDI Output | 1 (user optional) |
| RGB Output | 1×RCA |
| CVBS Output | 1×RCA, 1×BNC |
| Audio XRL Balance Output | 1 |
| General | |
| Operating Temperature | 0 ~ 45°C |
| Storage Temperature | -20 ~ + 70°C |
| Humidity | < 85% |
| Power Supply | 90 ~ 260 V AC, 50Hz/60Hz |
| Dimensions | 44 mm × 255 mm × 483 mm |
| Approximately Net Weight | 5 kg |
| Multicast Control Protocol | IGMPV2 |
| I/O Interface on back panel | |
| LNB I/O | 1× Input, 1× Loop Through Output |
| RS-232 | 1×9-Pin D-Sub Male (for Software Update) |
| RJ45 | 1×Ethernet Control Port, 1×TS over IP Output (factory optional) |
| ASI Input | 1 |
Specifications
User Manual
Images(1024).jpg)
.jpg)
Product registration 
Media & Awards