Satellite HD Free-To-Air-Receiver
IDL 3650s Onebox
Inverto’s new Onebox satellite receiver is optimized for receiving all free-to-air digital TV and radio channels via satellite in Standard Definition or High Definition. The Onebox receiver is a PVR-ready* device allowing users to record their TV programs on external USB storage devices.
The Onebox’s built-in strong Media Player can playback a wide range of music, video and photo formats such as MPEG2, MPEG4, H.264, XViD, MKV, AVI, MOV, JPEG and mp3. Thanks to its intuitive User Interface the installation is quick and the operation is simple providing an ultimate user experience.
The Onebox receiver is designed to meet Europe's strict regulations on low power consumption and incorporates an energy-saving standby mode reducing power consumption below 1 Watt. Software upgrades available routinely over satellite (ASTRA 19.2°E) or via www.invertotemp.tv for updating over the USB port guarantee you will always have access to Inverto’s latest software and features.
■ Receiving free-to-air SD and HD TV and Radio channels (max. resolution 1920x1080i)
■ TV recording (manual or scheduled from EPG) over USB storage devices (PVR-ready)*
■ Media Player supporting MPEG2, MPEG4, H.264, XViD, MKV, AVI, MOV, JPEG, mp3
■ 7 days TV Guide (EPG)
■ Favorite TV and Radio channel lists
■ DVB subtitles and Teletext
■ Multifeed - DiSEqC 1.0, DiSEqC 1.2 and USALS for motorized dish antenna
■ Quick installation, intuitive multilingual User Interface
■ Quick satellite scan (fast and blind scan modes)
■ Parental lock
■ Software update over USB and over satellite (ASTRA 19.2°E)
■ Energy saving standby mode - less than 1 Watt
■ 4 digit LED display
* Available on Country-specific basis for certain models only.
|General information||Power requirements|
|- Receiving Standard Definition and High||- Mains input voltage: 230V~|
|Definition TV and Radio channels||- Mains input frequency: 50 / 60 Hz|
|- TV Recording over USB drives (PVR-ready)*||- Power consumption: Typ.: 9 Watt, Max: 18 Watt|
|- Number of channels: 5000||- Energy saving standby mode: Less than 1 Watt|
|- Number of favorite lists: 4|
|- EPG: up to 7-days based on SI information||Physical Specification|
|- Media Player supporting MPEG2,||- Size (W * H * D): 235 mm * 38 mm * 180 mm|
|MPEG4, MKV, AVI, MOV, XViD,||- Operating temperature: +5°C to +35°C|
|JPEG, BMP, PNG and mp3||- Storage temperature: -20°C to +60°C|
|- Energy saving standby mode|
|- Software update over USB and over||Connectivity|
|satellite (ASTRA 19.2°E)||- 1 x USB2.0 High Speed Host port|
|Satellite Front-End||Rear panel Interfaces|
|- Modulation: DVB-S/S2, QPSK/8PSK||- Front-End:|
|- Input connector: F-connector (with Loop-through)||Input connector: IEC169-2, Socket|
|- Frequency range: 950-2150 MHz||(F-connector for Satellite front end)|
|- Symbol rate range: 1.5-45 MSym/s||Loop Through Output connector: IEC169-2, Plug|
|- Input level: - 25 to - 65 dBm||- TV SCART connector:|
|- LNB voltage: 13/18 V max 400 mA||CVBS (output), RGB (output)|
|- Tone control: 22 kHz||L&R Audio (output)|
|- DiSEqC1.0, 1.2, USALS||Fast Blanking, Slow Blanking|
|Video decoding||- RCA: Video CVBS (output), L&R Audio (output)|
|- MPEG2 MP@ML, MPEG4 Simple/Main/||- SPDIF (coaxial RCA)|
|Advanced Profile@L 3, H.264 MP@L3, HP@L4.1|
|- Max resolution 1920 × 1080i||Front panel|
|- Supported resolutions:||- Standby, Menu, Ok, Volume up/down,|
|576i over scart and CVBS interface and||Channel up/down and menu navigation keys|
|576i/p, 720p,1080i over HDMI Interface||- 4-character LED display|
|- Standard PAL||- 1 Standby LED Indicator|
|- Aspect ratio: 4:3 and 16:9, Automatic||- 1 IR Sensor|
|adjustment for 16:9 TV sets, Letter Box supported||- USB 2.0 host socket (Type A)|
|- Mono, Dual channel, Stereo, Joint Stereo||- User manual: English, German|
|MPEG1, MPEG2, MP3||- Remote Control Unit with 2 batteries|
|- Compliant to CE: 89/336/EEC (EMC),|
|73/23/EEC (low voltage directive)|
|- ROHS 2002/95/EG compliant|
|* Available on Country-specific basis for certain models only.|
• Your TV must be switched to the correct input (consult the User Manual of your TV). Also the signal type must be chosen in order to work with your TV. HDMI:
• Make sure that the HDMI cable is connected to the TV and your box
• Your TV must be switched to the correct input (consult the User Manual of your TV).
• Check if the resolution which is set for HDMI can be displayed by your TV, use “V format” button to switch the resolution.
• Control the volume on your box and on the TV.
HDMI: In case of no sound make sure that your TV is able to decode AC3 bit stream, Onebox does not support AC3 decoding.
• Point the remote control directly to the TV
• Ensure that there is nothing in between your box and the remote control.
• Other devices which are very close to the box and bright daylight could affect the reception of the signal
- Check connection cables, make sure your receiver is connected to the wall power connector.
- Check that the receiver has been switched on with the main switch on the back.