Single High-Band 40mm LNB (LO10.60 GHz)
Specifically designed for the European DTH markets, this LNB provides optimized reception capabilities. The LNB is factory-set for easy connectivity with any LO 10.60 Preset Set Top Box. It enables the reception of signals from one satellite and its distribution to a Set Top Box with Single Tuner. This LNB fully supports High Definition transmissions and provides excellent Noise Figure performance Designed to meet strict specifications and manufactured to the highest industry quality standards, this LNB is an ideal solution for the satellite broadcast reception across Europe.
• LO Frequency 10.60 GHz
• Low Phase Noise, DVB-S2 (HDTV) compliant
• Low Noise Figure
• Low Power Consumption
• High Cross Polarization Isolation
• High Frequency Stability
|Low Band Input Frequency Range||.|
|Low Band Output Frequency Range||.|
|Low Band LO Frequency||.|
|High Band Input Frequency Range||11.7 ~ 12.75 GHz|
|High Band Output Frequency Range||1100 ~ 2150 MHz|
|High Band LO Frequency||10.60 GHz|
|Noise Figure||0.3 dB Typ. (0.7dB Max.)|
|LO Initial Accuracy||+/- 1.0 MHz Max.|
|LO Temperature Drift||+/- 3.0 MHz Max.|
|Phase Noise (@ 10 kHz)||- 80 dBc/Hz Max.|
|Conversion Gain||55 dB Min.|
|Gain Ripple (Over 26MHz Bandwidth)||+/- 0.75 dB|
|Gain Variation (Over Full Band)||+/- 4 dB Max.|
|Image Rejection||40 dB Min.|
|1 dB Compression Point (@ Output)||0.0 dBm Min.|
|Cross Polarization Isolation||22 dB Min.|
|Control Signal Ca (Vertical Polarization)||11.0 ~ 14.0 V|
|Control Signal Cb (Horizontal polarization)||16.0 ~ 20.0 V|
|Control Signal Cc (Band Switching)||.|
|Output VSWR||2.5 : 1|
|In-Band Spurious||- 60 dBm Max.|
|Current Consumption||110 mA Max. @ 11 ~ 20 V|
|Operating Temperature||- 25 °C ~ + 60 °C|
|Output Impedance||75 Ω|
|Output Connector||F-Type (Female)|
What is a feedhorn?
The feedhorn is the part of a satellite dish system which gathers the reflected signal from the dish and focuses it towards the LNB.
What is an LNB?
What is an LNBF?
An LNBF is an LNB with an integrated feedhorn
What is a Monoblock LNB?
Why can I receive only one satellite with my Monoblock?
Monoblock LNBs are designed for a specific dish size, 80cm for example. If your dish is too small (70cm for example) or too wide (90cm for example) it is not possible to receive both satellites together. Please choose the dish size for which the monoblock LNB has been designed.