Want multiple satelites?

Want to receive more then 2 satellites on a standard dish?Have a look at our innovative MultiConnect system and learn what it can do for you...


Unicable Quad 40mm LNB, 1 Legacy (1 splitter*)


Item: 3013


A member of the innovative and award winning Unicable LNB series this highly competitive product enables the connection of up to 4 STBs using a single cable (providing STBs are Unicable compliant) over its Unicable port as well as one more STB over its “Legacy” port. The product is supplied with one splitter unit (optional) for a flexible distribution of the satellite signal at home. It was specifically designed for the European DTH markets, and provides optimized reception capabilities for High Definition transmissions. Manufactured to the highest industry quality standards and with excellent noise figure and phase noise performance, this LNB is an ideal solution for multi-room satellite reception and is a product of choice for most leading digital satellite TV operators across Europe.


For more information on the Unicable technology and its advantages please refer to: www.inverto.tv/unicable        


Main Features

• Low Phase Noise, HDTV-DVBS2 compliant

• Low Noise Figure

• Low Power Consumption

• Very high  Cross Polarization Isolation

• Very high Frequency Stability

• 1 Legacy Port



Product Specifications


Low Band Input Frequency Range 10.7 ~ 11.7 GHz
Low Band Output Frequency Range 950 ~ 1950 MHz
Low Band LO Frequency 9.75 GHz
High Band Input Frequency Range 11.7 ~ 12.75 GHz
High Band Output Frequency Range 1100 ~ 2150 MHz
High Band LO Frequency 10.6 GHz
Noise Figure 0.7 dB Max.
LO Initial Accuracy +/- 1.0 MHz Max.
LO Temperature Drift +/- 2.5 MHz Max.
Phase Noise (@ 10 kHz) - 90 dBc / Hz Max.
SCR Conversion Gain 57 dB Min.
Legacy Conversion Gain 55 dB Min.
Gain Ripple (Over 26 MHz Bandwidth) +/- 0.75 dB
Gain Variation (Over Full Band)  +/- 4 dB Max.
Image Rejection 40 dB Min.
1 dB Compression Point (@ Output) 0.0 dBm Min.
Cross Polarization Isolation 22 dB Min.
Output VSWR 2.5 : 1 
In-Band Spurious - 60 dBm Max.
Output IF Channel 1 (SCR0)  1210 MHz
Output IF Channel 2 (SCR1) 1420 MHz
Output IF Channel 3 (SCR2) 1680 MHz
Output IF Channel 4 (SCR3)  2040 MHz
Channel Isolation 20 dB Min.
Legacy Ports 1
SCR's Control Signals  DiSEqC command extension based on EN-50494
Legacy Switch Voltage Control  < 14.2 V (Vertical),  > 15 V (Horizontal)
Legacy 22 k Sensitivity  220 mV Min.
Current Consumption 250 mA Max. @ 13.5 V
Operating Temperature - 30 °C  ~  + 60 °C
Output Impedance 75 Ω
Output Connector F-Type (Female)
Weight 350 g
Frequently Asked Questions

Which Set-top Boxes in the market support the Unicable technology?

To see which Set-top boxes in the market support the unicable technology please download the PDF available in the following link:http://www.invertotemp.tv/downloads/support.php?id=619





What is a feedhorn?

The feedhorn is the part of a satellite dish system which gathers the reflected signal from the dish and focuses it towards the LNB.

What is an LNB?

An LNB - Low Noise Block (also called an LNC- Low Noise Converter), is used for communications (broadcast) satellite reception. The LNB is usually affixed either in or on the satellite dish.

What is an LNBF?

An LNBF is an LNB with an integrated feedhorn

What is a Monoblock LNB?

This design consists of two independent LNBs in a single case. The two LNBs can be automatically addressed with any DiSEqC 1.0 or higher receiver. In some cases they can also be addressed with ToneBurst / MiniDiSEqC. However, they are only available for satellites with a fixed 3 degree, 4.3 degree, 6 degree …spacing. In Europe, for example, there are monoblock single, twin and quad LNBs for the Ku band, which have a pre-defined spacing of 6 degrees (for Astra 1 / Hotbird , for example).

Why can I receive only one satellite with my Monoblock?

Monoblock LNBs are designed for a specific dish size, 80cm for example. If your dish is too small (70cm for example) or too wide (90cm for example) it is not possible to receive both satellites together. Please choose the dish size for which the monoblock LNB has been designed.