Unicable Quad 40mm LNB, 1 Legacy (1 splitter*)
A member of the innovative and award winning Unicable LNB series this highly competitive product enables the connection of up to 4 STBs using a single cable (providing STBs are Unicable compliant) over its Unicable port as well as one more STB over its “Legacy” port. The product is supplied with one splitter unit (optional) for a flexible distribution of the satellite signal at home. It was specifically designed for the European DTH markets, and provides optimized reception capabilities for High Definition transmissions. Manufactured to the highest industry quality standards and with excellent noise figure and phase noise performance, this LNB is an ideal solution for multi-room satellite reception and is a product of choice for most leading digital satellite TV operators across Europe.
For more information on the Unicable technology and its advantages please refer to: www.inverto.tv/unicable
• Low Phase Noise, HDTV-DVBS2 compliant
• Low Noise Figure
• Low Power Consumption
• Very high Cross Polarization Isolation
• Very high Frequency Stability
• 1 Legacy Port
|Low Band Input Frequency Range||10.7 ~ 11.7 GHz|
|Low Band Output Frequency Range||950 ~ 1950 MHz|
|Low Band LO Frequency||9.75 GHz|
|High Band Input Frequency Range||11.7 ~ 12.75 GHz|
|High Band Output Frequency Range||1100 ~ 2150 MHz|
|High Band LO Frequency||10.6 GHz|
|Noise Figure||0.7 dB Max.|
|LO Initial Accuracy||+/- 1.0 MHz Max.|
|LO Temperature Drift||+/- 2.5 MHz Max.|
|Phase Noise (@ 10 kHz)||- 90 dBc / Hz Max.|
|SCR Conversion Gain||57 dB Min.|
|Legacy Conversion Gain||55 dB Min.|
|Gain Ripple (Over 26 MHz Bandwidth)||+/- 0.75 dB|
|Gain Variation (Over Full Band)||+/- 4 dB Max.|
|Image Rejection||40 dB Min.|
|1 dB Compression Point (@ Output)||0.0 dBm Min.|
|Cross Polarization Isolation||22 dB Min.|
|Output VSWR||2.5 : 1|
|In-Band Spurious||- 60 dBm Max.|
|Output IF Channel 1 (SCR0)||1210 MHz|
|Output IF Channel 2 (SCR1)||1420 MHz|
|Output IF Channel 3 (SCR2)||1680 MHz|
|Output IF Channel 4 (SCR3)||2040 MHz|
|Channel Isolation||20 dB Min.|
|SCR's Control Signals||DiSEqC command extension based on EN-50494|
|Legacy Switch Voltage Control||< 14.2 V (Vertical), > 15 V (Horizontal)|
|Legacy 22 k Sensitivity||220 mV Min.|
|Current Consumption||250 mA Max. @ 13.5 V|
|Operating Temperature||- 30 °C ~ + 60 °C|
|Output Impedance||75 Ω|
|Output Connector||F-Type (Female)|
Which Set-top Boxes in the market support the Unicable technology?
To see which Set-top boxes in the market support the unicable technology please download the PDF available in the following link:http://www.invertotemp.tv/downloads/support.php?id=619
What is a feedhorn?
The feedhorn is the part of a satellite dish system which gathers the reflected signal from the dish and focuses it towards the LNB.
What is an LNB?
What is an LNBF?
An LNBF is an LNB with an integrated feedhorn
What is a Monoblock LNB?
Why can I receive only one satellite with my Monoblock?
Monoblock LNBs are designed for a specific dish size, 80cm for example. If your dish is too small (70cm for example) or too wide (90cm for example) it is not possible to receive both satellites together. Please choose the dish size for which the monoblock LNB has been designed.