Want multiple satelites?

Want to receive more then 2 satellites on a standard dish?Have a look at our innovative MultiConnect system and learn what it can do for you...

Pro

Single Straight-feed 40mm LNB with embedded DiSEqC

IDLB-SINS40-DISEQ-OPP

Item: 3115

IDLB-SINS40-DISEQ-OPP

With its embedded DiSEqC switch this LNB will enable the connection of an additional single LNB without the need to add an additional external switch. It is suitable for users owning a dish larger or smaller than 80cm or wanting to receive two  satellites which are not supported with one of our existing Monoblock LNBs . As it was specifically designed for the European DTH markets, this LNB provides optimized reception capabilities. It is ready for High Definition transmissions and provides excellent Noise Figure performance. Designed to meet the most strict specifications and manufactured to the highest industry quality standards , this LNB is an ideal solution for the satellite broadcast reception across Europe.

 

Main Features:

  • Low Phase Noise, DVB-S2 (HDTV) compliant
  • Low Noise Figure ( 0.2 dB)
  • Low Power Consumption
  • Very high  Cross Polarization Isolation
  • Very high Frequency Stability  
Product Specifications
draw

 

Low Band Input Frequency Range 10.7 ~ 11.7 GHz
Low Band Output Frequency Range 950 ~ 1950 MHz
Low Band LO Frequency 9.75 GHz
High Band Input Frequency Range 11.7 ~ 12.75 GHz
High Band Output Frequency Range 1100 ~ 2150 MHz
High Band LO Frequency 10.6 GHz
Noise Figure 0.2 dB Typ. (0.7dB Max.)
LO Initial Accuracy +/- 1.0 MHz Max.
LO Temperature Drift +/- 3.0 MHz Max.
Phase Noise (@ 10 kHz) - 90 dBc / Hz Max.
Conversion Gain 52 ~ 65 dB
Gain Ripple (Over 26 MHz Bandwidth) +/- 0.75 dB
Gain Variation (Over Full Band)  +/- 4 dB Max.
Image Rejection 40 dB Min.
1 dB Compression Point (@ Output) 0.0 dBm Min.
Cross Polarization Isolation 22 dB Min.
Control Signal Ca (Vertical Polarization) 11.0 ~ 14.0 V
Control Signal Cb (Horizontal Polarization) 16.0 ~ 20.0 V
Control Signal Cc (Band Switching) 22 +/- 4 kHz
DiSEqC A Input The Integrated LNB
DiSEqC B Input The External LNB
In-Band Spurious - 60 dBm Max.
Current Consumption 120 mA Max. @ 11 ~ 20 V
Operating Temperature - 30 °C  ~  + 60 °C
Output Impedance (to STB) 75 Ω
Output Connector  F-Type (Female)
Output VSWR (to STB) 2.5 : 1 
Input Impedance (to 2nd LNB) 75 Ω
Input Connector F-Type (Female)
Input VSWR (to 2nd LNB) 2.5 : 1 
Weight 134 g
Frequently Asked Questions

What is a feedhorn?

The feedhorn is the part of a satellite dish system which gathers the reflected signal from the dish and focuses it towards the LNB.

What is an LNB?

An LNB - Low Noise Block (also called an LNC- Low Noise Converter), is used for communications (broadcast) satellite reception. The LNB is usually affixed either in or on the satellite dish.

What is an LNBF?

An LNBF is an LNB with an integrated feedhorn

What is a Monoblock LNB?

This design consists of two independent LNBs in a single case. The two LNBs can be automatically addressed with any DiSEqC 1.0 or higher receiver. In some cases they can also be addressed with ToneBurst / MiniDiSEqC. However, they are only available for satellites with a fixed 3 degree, 4.3 degree, 6 degree …spacing. In Europe, for example, there are monoblock single, twin and quad LNBs for the Ku band, which have a pre-defined spacing of 6 degrees (for Astra 1 / Hotbird , for example).

Why can I receive only one satellite with my Monoblock?

Monoblock LNBs are designed for a specific dish size, 80cm for example. If your dish is too small (70cm for example) or too wide (90cm for example) it is not possible to receive both satellites together. Please choose the dish size for which the monoblock LNB has been designed.