Want multiple satelites?

Want to receive more then 2 satellites on a standard dish?Have a look at our innovative MultiConnect system and learn what it can do for you...


Mini Single 40mm LNB


Item: 3104


Specifically designed for the European DTH markets, this LNB provides optimized reception capabilities. It enables the reception of signal from one satellite and its distribution to a single tuner Set-top box. It is ready for High Definition transmissions and provides excellent Noise Figure performance. Manufactured to the highest industry quality standards and designed to meet strict specifications, this LNB is an ideal solution for the satellite broadcast reception across Europe.


Main Features

• Low Phase Noise, DVB-S2 (HDTV) compliant

• Low Noise Figure

• Low power consumption

• High Cross-Pole performance

• High Frequency stability  

Product Specifications

Low Band Input Frequency Range

10.7~11.7 GHz

Low Band Output Frequency Range

950~1950 MHz

LO Frequency

9.75 GHz

High Band Input Frequency Range

11.7~12.75 GHz

High Band Output Frequency Range 1100~2150 MHz
LO Frequency 10.6 GHz
Noise Figure 0.3dB Typ.(0.7dB Max.)
LO Initial Accuracy +/- 1.0 MHz max.
LO Temperature Drift +/- 3.0 MHz max.
LO Phase Noise @ 10K Hz -80 dBc/Hz max.
Conversion Gain 55 dB min.
Gain Ripple +/- 0.75 dB/27 MHz
Gain Variation +/- 4 dB
Image Rejection 40 dB min.
1 dB Compression Point (O/P) 0.0 dBm min.
Cross talk 20 dB min.
Control Signals Ca [ V ] 11.0~14.0 V
Control Signals Cb [ H ] 16.0~20.0 V
Control Signals Cc [Band switching] 22 KHz +/- 4 KHz 0.4 V – 0.8 V pp
Output VSWR 2.5 : 1
Radiated Interference -50 dBm max.
DC Power 180 mA max. @ 11 – 20V
Working Temperature -30~+60 °C
Output Impedance (connect to STB) 75 Ω
Output connector F-type (female)
Weight 181 g
Frequently Asked Questions

What is a feedhorn?

The feedhorn is the part of a satellite dish system which gathers the reflected signal from the dish and focuses it towards the LNB.

What is an LNB?

An LNB - Low Noise Block (also called an LNC- Low Noise Converter), is used for communications (broadcast) satellite reception. The LNB is usually affixed either in or on the satellite dish.

What is an LNBF?

An LNBF is an LNB with an integrated feedhorn

What is a Monoblock LNB?

This design consists of two independent LNBs in a single case. The two LNBs can be automatically addressed with any DiSEqC 1.0 or higher receiver. In some cases they can also be addressed with ToneBurst / MiniDiSEqC. However, they are only available for satellites with a fixed 3 degree, 4.3 degree, 6 degree …spacing. In Europe, for example, there are monoblock single, twin and quad LNBs for the Ku band, which have a pre-defined spacing of 6 degrees (for Astra 1 / Hotbird , for example).

Why can I receive only one satellite with my Monoblock?

Monoblock LNBs are designed for a specific dish size, 80cm for example. If your dish is too small (70cm for example) or too wide (90cm for example) it is not possible to receive both satellites together. Please choose the dish size for which the monoblock LNB has been designed.