BLACK Unicable
New

Unicable cascadable switch 4 User Bands

IDLP-USW1O2-CUO1O-4PP

Item: 3710

IDLP-USW1O2-CUO1O-4PP

The IDLP-USW1O2-CUO1O-4PP is a small form factor Unicable multiswitch enabling installations with up to 4 satellite receivers over a single cable.

 

Providing full flexibility and supporting various installation scenarios, the multiswitch may be powered either by the connected Unicable receivers directly or through an external AC/DC Power Supply and a Power Inserter in case the current consumed by the switch and the connected Quattro LNB is greater then the current supply supported by the connected receivers - see supported installations diagram below.

 

The multiswitch receives (and cascades) four satellite IF bands (L/V, L/H, H/V and H/H). The communication protocol between the multiswitch and the receivers connected through the Unicable port is based on the EN 50494 standard for single cable distribution.

 

For indoor and outdoor installations. 

Product Specifications
draw

 

Inputs 4 x Satellite IF Inputs from Quattro LNB
  4 x Loopthrough Satellite IF Outputs
Outputs  1 x Unicable Output for 4 STBs  Max.
Control Protocol  DiSEqC Extension Commands per EN50494
Inputs Frequency Range 950 ~ 2150 MHz
Conversion Gain:   .
Unicable Output + 10  ~  + 20 dB
Output Signal Level (AGC controlled)  93 dBμV
Input Power Range - 45 ~  - 15 dBm
User Band (Channel) Bandwidth 40 MHz
User Band (Channel) Gain Ripple 3 dB Max.
User Band Frequencies (Channels) CH 0 :  1210.00 MHz
  CH 1 :  1420.00 MHz
  CH 2 :  1680.00 MHz
  CH 3 :  2040.00 MHz
RF Isolation: .
Satellite/Satellite IF 28 dB  Min.
Satellite Channel/Channel (User Bands) 30 dB Min.
LO Phase Noise @1 KHz: -92 Max. dBc/Hz
  @10 KHz: - 101 Max. dBc/Hz
  @100 KHz: - 99 Max. dBc/Hz
  @1 MHz: -103 Max. dBc/Hz
  @10 MHz: - 127 Max. dBc/Hz
Integrated Phase Noise 1.5 Degrees Max.
Input / Output VSWR 2.5 : 1
Input / Output Impedance 75 Ω 
Input / Output Connector F-Type
LNB Input V/L=>13 V /0 K , V /H=>13 V /22 K  (V)
  H/L=>18 V /0 K , H/H=>18 V /22 K  (H)
LNB Current Consumption 400 mA @ 13 ~ 18 V
DC Current Consumption 225 mA Max. @ 20 V (F-Type)
Operating Temperature - 20  ~  + 60 °C
Dimensions 120 x 88 x 35 (H x W x D) mm
Frequently Asked Questions
There is no FAQ available for this product