BLACK pro

Professional MPEG-2 DVB integrated Receiver/Decoder with IP interface

IDLV-4000P

Item: 3772

IDLV-4000P
IDLV-4000P

The IDLV-4000P is Inverto’s flagship of the professional IRD receiver series. This IRD is equipped with a variety of input (including DVB over ASI, IP, QPSK, QAM, COFDM and DS3) and output (CVBS, SDI, ASI, DS3 and IP) combinations. LAN control and monitoring are achieved by TCP/IP, SNMP and HDMS*. With its new level of features and flexibility, the IDLV-4000P becomes an ideal product for your digital headend system.

 

 Main Features:

• Fully complies with MPEG-2, MP@ ML and DVB-S/-T/-C Standards

• IP Input or Output with UDP/RTP (optional)

• Multicast and Unicast on IP

• Supports PAL, NTSC and SECAM

• Supports various Conditional Access Systems (CAS)

• LAN Control based on TCP/IP, SNMP and HDMS*

• SDI Video Output with digital Audio embedded

• Two Sets of independent ASI Outputs

• Automatic PMT Update

• Compatible with Multiple De-encrypt CI Modules

• DS3 I/O for TS (optional)

• Switchable Audio Channel

• VBI-Teletext, EBU and DVB-Subtitle

• Upgradable through LAN Options

• DVB-S, DVB-T or DVB-C Tuner Input

• High Speed 100M Base-T IP Output

• High Speed 100M Base-T IP Input

• DS3I/OCard

 

(*Headend Devices Management System; Proprietary Software)

Product Specifications
draw

 

QPSKM Demodulation & FEC Parameters    
Input Frequency Range  950 ~ 2150 MHz 
Input Level  - 25 ~ - 65 dBm 
Input Impedance  75Ω, F type 
Symbol Rate  2~  45Mb/s (SCPC or MCPC) 
Roll Off Factor  0.20 or 0.35 
Punctured Rates  1/2, 2/3, 3/4, 5/6, 6/7, 7/8 
Reeds Salomon Decoding  204, 188, T = 8 and I=12 
   
DVB-C QAM Demodulation    
Connector  IEC, Female (7/8 MHz) or F Female (6 MHz) Input 
Input Symbol Rate Range  1 ~ 7 Mbps (PAL), 1 ~ 6 Mbps (NTSC) 
Demodulation  16/32/64/128/256 QAM 
Tuner Bandwidth  6 MHz or 7 MHz or 8 MHz (factory optional) 
FEC Decoder  1/2, 2/3, 3/4, 5/6, 7/8; K=7 
Frequency Range  50 ~ 860 MHz 
Digital Signal Input Level  -15 ~ 15 dBmV 
Input Impedance  75Ω, F type 
   
DVB-T COFDM Demodulation    
Connector  IEC, Female (7/8 MHz) or F Female (6 MHz) Input 
1 IF Loop Through  Yes 
Frequency Range  470 ~ 862MHz; 174~230 MHz 
Input Symbol Rate  4.98 ~ 31.67Mbit/s (8MHz Bandwidth)
Constellation  QPSK, 16QAM, 64QAM 
Tuner Bandwidth  8 MHz 
Digital Signal Input Level  -20 ~ - 75 dBmV 
Input Impedance  75 Ω, unbalanced 
FFT Mode  2 K/ 8 K 
Guard Interval  1/4, 1/8, 1/16, 1/32, off 
FEC Code Rate  1/2, 2/3, 3/4, 5/6 and 7/8 
   
DS3 Input    
Input Impedance  75 Ω 
Connector  BNC 
Maximum Input Code Rate  44.736 Mbit/s 
Format  Unframed Framing according to G.804 / G.752 (DS3) 
   
DS3 Loop Through Output    
Impedance  75 Ω 
Maximum Output Code Rate  44.736 Mbit/s 
Connector  BNC 
Format  Unframed Framing according to G.804 / G.752 (DS3) 
   
TS over IP Output    
Connetctor  100base-T RJ45 
Output Bit Rate  70 Mbits/s Max. 
UDP/RTP  Multicast or Unicast 
ASI Output  2×Redundant Output 
SDI Output  1 (user optional) 
RGB Output  1×RCA 
CVBS Output  1×RCA, 1×BNC 
Audio XRL Balance Output  1
   
General    
Operating Temperature  0 ~ 45°C 
Storage Temperature  -20 ~  + 70°C 
Humidity  < 85% 
Power Supply  90 ~ 260 V AC, 50Hz/60Hz 
Dimensions  44 mm × 255 mm × 483 mm 
Approximately Net Weight  5 kg 
Multicast Control Protocol  IGMPV2 
   
I/O Interface on back panel   
LNB I/O  1× Input, 1× Loop Through Output 
RS-232  1×9-Pin D-Sub Male (for Software Update)
RJ45  1×Ethernet Control Port, 1×TS over IP Output (factory optional) 
ASI Input  1
Frequently Asked Questions
There is no FAQ available for this product